a perfect fixing for your business

private area
vbt logo
Products / Anchors / Metal fixings / MTD / MTD-M
MTD-M
MTD-M

MTD-M

Through bolt anchor for heavy loads in cracked & uncracked concrete. Inches. ICC Assessed. 304 stainless steel shaft and clip

ASSESSMENTS AND CERTIFICATES

CODESIZEMin. Order Qty.Pcs. x jarPcs BoxPcs MasterboxEANTechnical info.
ADM0142141/4" x 2-1/4"0020008423533493668
  • tfix - Max. fixture thickness0,19
  • SW - Installation key7/16"
  • df - Ø Element to fix5/16"
  • Tins - Torque (Nm)5
  • hnom - Min. anchor depth1,68
  • h1 - Drill hole depth min.2"
  • d0 - Ø Drill1/4"
  • hmin - Min. substrate thickness4"
  • L - Lenght2-1/4"
ADM0383003/8" x 3"0010008423533493705
  • tfix - Max. fixture thickness0,18
  • SW - Installation key9/16"
  • df - Ø Element to fix7/16"
  • Tins - Torque (Nm)20
  • hnom - Min. anchor depth2,33
  • h1 - Drill hole depth min.2-5/8"
  • d0 - Ø Drill3/8"
  • hmin - Min. substrate thickness4"
  • L - Lenght3"
ADM0383343/8" x 3-3/4"0010008423533493712
  • tfix - Max. fixture thickness0,93
  • SW - Installation key9/16"
  • df - Ø Element to fix7/16"
  • Tins - Torque (Nm)20
  • hnom - Min. anchor depth2,33
  • h1 - Drill hole depth min.2-5/8"
  • d0 - Ø Drill3/8"
  • hmin - Min. substrate thickness4"
  • L - Lenght3-3/4"
ADM0385003/8" x 5"005008423533493729
  • tfix - Max. fixture thickness2,18
  • SW - Installation key9/16"
  • df - Ø Element to fix7/16"
  • Tins - Torque (Nm)20
  • hnom - Min. anchor depth2,33
  • h1 - Drill hole depth min.2-5/8"
  • d0 - Ø Drill3/8"
  • hmin - Min. substrate thickness4"
  • L - Lenght5"
ADM0122341/2" x 2-3/4"005008423533493736
  • tfix - Max. fixture thickness0,25
  • SW - Installation key3/4"
  • df - Ø Element to fix9/16"
  • Tins - Torque (Nm)45
  • hnom - Min. anchor depth1,83"
  • h1 - Drill hole depth min.2"
  • d0 - Ø Drill1/2"
  • hmin - Min. substrate thickness4"
  • L - Lenght2-3/4"
ADM0124141/2” x 4-1/4”005008423533493750
  • tfix - Max. fixture thickness1,25
  • SW - Installation key3/4"
  • df - Ø Element to fix9/16"
  • Tins - Torque (Nm)45
  • hnom - Min. anchor depth2,33"
  • h1 - Drill hole depth min.2-5/8"
  • d0 - Ø Drill1/2”
  • hmin - Min. substrate thickness4"
  • L - Lenght4-1/4”
ADM0124121/2" x 4-1/2"005008423533493767
  • tfix - Max. fixture thickness0,24
  • SW - Installation key3/4"
  • df - Ø Element to fix9/16"
  • Tins - Torque (Nm)45
  • hnom - Min. anchor depth3,59
  • h1 - Drill hole depth min.4"
  • d0 - Ø Drill1/2"
  • hmin - Min. substrate thickness6"
  • L - Lenght4-1/2"
ADM0125121/2" x 5-1/2"005008423533493774
  • tfix - Max. fixture thickness1,24
  • SW - Installation key3/4"
  • df - Ø Element to fix9/16"
  • Tins - Torque (Nm)45
  • hnom - Min. anchor depth3,59
  • h1 - Drill hole depth min.4"
  • d0 - Ø Drill1/2"
  • hmin - Min. substrate thickness6"
  • L - Lenght5-1/2"
ADM0584125/8" x 4-1/2"002508423533493804
  • tfix - Max. fixture thickness0,49
  • SW - Installation key15/16"
  • df - Ø Element to fix11/16"
  • Tins - Torque (Nm)80
  • hnom - Min. anchor depth3,23"
  • h1 - Drill hole depth min.3-1/2"
  • d0 - Ø Drill5/8"
  • hmin - Min. substrate thickness5-1/2"
  • L - Lenght4-1/2"
ADM0585005/8" x 5"002508423533493811
  • tfix - Max. fixture thickness0,99
  • SW - Installation key15/16"
  • df - Ø Element to fix11/16"
  • Tins - Torque (Nm)80
  • hnom - Min. anchor depth3,23"
  • h1 - Drill hole depth min.3-1/2"
  • d0 - Ø Drill5/8"
  • hmin - Min. substrate thickness5-1/2"
  • L - Lenght5"
ADM0586005/8" x 6"002508423533493828
  • tfix - Max. fixture thickness0,73
  • SW - Installation key15/16"
  • df - Ø Element to fix11/16"
  • Tins - Torque (Nm)80
  • hnom - Min. anchor depth4,49"
  • h1 - Drill hole depth min.4-3/4"
  • d0 - Ø Drill5/8"
  • hmin - Min. substrate thickness6-1/2"
  • L - Lenght6"
ADM0587005/8" x 7"002508423533493835
  • tfix - Max. fixture thickness1,73
  • SW - Installation key15/16"
  • df - Ø Element to fix11/16"
  • Tins - Torque (Nm)80
  • hnom - Min. anchor depth4,49"
  • h1 - Drill hole depth min.4-3/4"
  • d0 - Ø Drill5/8"
  • hmin - Min. substrate thickness6-1/2"
  • L - Lenght7"
ADM0344343/4" x 4-3/4"002008423533493866
  • tfix - Max. fixture thickness0,1
  • SW - Installation key1-1/8"
  • df - Ø Element to fix7/8"
  • Tins - Torque (Nm)150
  • hnom - Min. anchor depth3,74"
  • h1 - Drill hole depth min.4"
  • d0 - Ø Drill3/4"
  • hmin - Min. substrate thickness6"
  • L - Lenght4-3/4"
ADM0345123/4" x 5-1/2"002008423533493873
  • tfix - Max. fixture thickness0,85
  • SW - Installation key1-1/8"
  • df - Ø Element to fix7/8"
  • Tins - Torque (Nm)150
  • hnom - Min. anchor depth3,74"
  • h1 - Drill hole depth min.4"
  • d0 - Ø Drill3/4"
  • hmin - Min. substrate thickness6"
  • L - Lenght5-1/2"
ADM0347003/4" x 7"002008423533493897
  • tfix - Max. fixture thickness0,83
  • SW - Installation key1-1/8"
  • df - Ø Element to fix7/8"
  • Tins - Torque (Nm)150
  • hnom - Min. anchor depth5,26"
  • h1 - Drill hole depth min.5-3/4"
  • d0 - Ø Drill3/4"
  • hmin - Min. substrate thickness8"
  • L - Lenght7"
ADM0348123/4" x 8-1/2"002008423533493903
  • tfix - Max. fixture thickness2,33
  • SW - Installation key1-1/8"
  • df - Ø Element to fix7/8"
  • Tins - Torque (Nm)150
  • hnom - Min. anchor depth5,26"
  • h1 - Drill hole depth min.5-3/4"
  • d0 - Ø Drill3/4"
  • hmin - Min. substrate thickness8"
  • L - Lenght8-1/2"
  • Fixing of shelves
  • Steel structures
  • Protections
  • Street furniture
  • Machinery
  • Wooden structures
  • Antennae
  • Balcony railings
  • Road railings
  • Wooden railings
  • Beach railings
  • Ceiling lights
  • False ceilings
  • False ceilings
  • Ceiling lights
  • False ceilings
  • Ceiling lights
  • False ceilings
  • Ceilings
  • Ceilings
  • Ceilings
  • Ceilings
  • Ceilings
  • Ceilings
icon book
Technical Sheets
FT_MTD-M-en_rev5.pdf

related products

MTL

MTL

Zinc-plated shaft. Zinc-plated clip
MTD-X

MTD-X

ICC Assessed. Zinc-plated shaft. Clip ATLANTIS C3-L
TLE

TLE

ICC Assessed. Hexagon head

Request more information

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more
logo VBT white

VBT
Av. Laurel 205 Fracc. industrial El Vergel
38110-Celaya Guanajuato – México

Facebook-f X-twitter Linkedin-in Youtube Rss
featured products
downloads
logo lontana white

Más productos...

MTD-M

MTD-M

ICC Assessed. 304 stainless steel shaft and clip
COMPRAR ONLINE
COMPRAR EN TIENDA
products
Metal fixings
Chemical fixings
Plastic fixings
Fixings and accessories for thermal insulation systems (ETICS)
Fixings & accesories for plasterboard
Fixings & accesories for Drywall
Direct fixing
Screws for decking and façades
Drill, tapping and PVC screws
Nails and bolts
Plugs, tips and accessories
Heavy metal clamps
Light metal clamps
Fire protection systems
Plastic clamps
Profiles and supports
Quick beam attachament system
Threaded rod and fixing accesories

TECHNICAL TRAINING

Our engineering department provides specific and personalised training on the different topics related to fixing systems: metallic or chemical fixings, installation systems, regulations, calculations, etc.

 

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

site visits

The relationship with our customers does not end with the sale of our products. At INDEX® we understand that it is often necessary to accompany them on site, where our experience is the best ally to ensure fits works perfectly. Our engineers and technicians support the managers of each project in planning and selecting the best solution for effectively saving time and money.

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

ENGINEERING SERVICES AND CALCULATIONS

At INDEX® we want to offer our customers the most comprehensive service. In addition to providing them with the best fixing and anchor solutions, our team of specialised engineers technically advises all our customers. We also have powerful software tools to do any necessary calculations with total accuracy.

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more
vbt logo
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.